|
Doorking DKS-6300 Gate Openers
Looking for an automatic swing gate
opener that combines security and ease of use? Shop from
the openers listed below, or view our entire line of
Doorking gate operators.
Email us
or call toll-free 877-275-1270 for assistance from a gate
expert.
|
 |
The 6300 series operators are
designed to operate vehicular swing gates in residential,
commercial and industrial applications. These operators are
designed so that they can be either pad or post mounted
without any costly and time consuming field modifications.
You
need to specify which mounting method when ordering. The
unique design of these operators allows the gate arm to be
attached to the bottom rail of the gate. This eliminates the
need for any brackets to be welded to the face of the gate and
creates an aesthetically pleasing installation. |
These operators can be
equipped with a factory installed DC Convenience Open option
which will automatically open the gate in the event of a power
outage.
Advanced Features
-
Self-adjusting, no maintenance
magnetic limits.
-
Overlap feature for dual swing
gate operation.
-
Designed with a built-in primary
and secondary entrapment prevention system.
-
Ports for plug-in loop detectors.
-
Two convenience outlets.
-
Fail-safe release.
-
Tamper detect circuit.
-
DC Powered convenience open
(optional).
-
Gate tracker reporting output.
-
Programming switches.
-
Built-in reset switch.
-
Built-in power On/Off switch.
Specifications
Model 6300 with 1/2 HP Motor
-
Maximum gate width 18-feet.
-
Maximum gate weight 700 pounds*.
(*Assumes gate swings level and is in good condition with
properly adjusted hardware. Other external factors may affect
the performance of the gate operator.)
-
Swings gate 90 degrees in
approximately 15-seconds.
-
1/2 HP continuous-duty motor.
-
115, 230*, 460* VAC. (*230 and
460 volt units use a step-down power transformer to achieve
115 volt operating voltage.)
-
Class I, II, III and IV
applications.
-
Compliant with UL 325 and 991.
ETL Listed.
-
Dimensions (operator only):
13.25"W x 12"H* x 28"D (* Height of operator only. Actual
height above ground is determined by which mounting method is
used)
DoorKing DKS6300-080 1/2 HP
115 V SW OPERATOR
DoorKing DKS6300-081 1/2 HP
SEC SWING OPER
DoorKing DKS6300-082 1/2 HP
PRI SWING OPER W/DC OPEN
DoorKing DKS6300-083 1/2 HP
SEC OPER W/CONV-OPEN
For pricing or to place an order
please call us toll-free now at (877)
275-1270.
Model 6300 with 1 HP Motor Specs
-
Maximum gate width 22-feet.
-
Maximum gate weight 800 pounds*.
(*Assumes gate swings level and is in good condition with
properly adjusted hardware. Other external factors may affect
the performance of the gate operator.)
-
Swings gate 90 degrees in
approximately 15-seconds.
-
1 HP continuous-duty motor.
-
115, 230*, 460* VAC. (*230 and
460 volt units use a step-down power transformer to achieve
115 volt operating voltage.)
-
Class I, II, III and IV
applications.
-
Compliant with UL 325 and 991.
ETL listed.
-
Dimensions (operator only):
13.25"W x 12"H* x 28"D (* Height of operator only. Actual
height above ground is determined by which mounting method is
used)
DoorKing DKS6300-084 1 HP
PRI SWING OPER 115 VAC
DoorKing DKS6300-085 1 HP
SEC SWING OPER
DoorKing DKS6300-086 1 HP
PRI SW OPER W/CONV OPEN
DoorKing DKS6300-087 1 HP
SEC SW OPER W/CONV OPEN
For pricing or to place an order
please call us toll-free now at (877)
275-1270.
|
