|
Doorking DKS-9150 Gate Opener -
Commercial & Industrial Operator
Looking for an automatic swing gate
opener that combines security and ease of use? Shop from
the openers listed below, or view our entire line of
Doorking gate operators. Please
Email us
or call toll-free 877-275-1270 for assistance from a gate
expert.
Model 9150 operators are designed
to operate vehicular slide gates in residential, commercial
and industrial applications. These operators are designed so
that they can easily be mounted in the front, center or rear
of the gate without any costly and time consuming field
modifications.
In addition, the operators can be
pad or post mounted to meet any installation requirements. The
9150 can be equipped with a factory installed DC Convenience
Open option which will automatically open the gate in the
event of a power outage.
Advanced Features
Self-adjusting, no maintenance
magnetic limits.
Partial-open feature.
Anti-tailgating feature.
Gate tracker reporting output.
Ports for plug-in loop detectors.
DC Powered Convenience Open
(Optional).
Two convenience outlets.
Fail-safe release (fail-secure
optional).
Programming switches.
Built-in reset switch.
Built-in power On/Off switch.
Specifications
Model 9150 with 1 HP Motor
Maximum gate length 45-feet.
Maximum gate weight 1500 pounds*.
1 HP continuous-duty motor.
115, 230*, 460* VAC (*230 and 460
volt units use a step-down power transformer to achieve 115
volt operating voltage.)
Operator is shipped with chain
brackets and 20-feet of #40 chain.
Class I, II, III and IV
applications.
Compliant with UL 325 and 991. ETL
listed.
Dimensions: 15"W x 24"H x 16.5"D
DoorKing DKS9150-080 1 HP
SLIDE OPER FOR 45 x 1500
DoorKing DKS9150-082 1 HP
SLIDE OPER W/
CONV OPEN
For pricing or to place an order
please call us toll-free now at (877)
275-1270.
Model 9150 with 1/2 HP Motor
Maximum gate length 30-feet.
Maximum gate weight 1000 pounds*.
(*Assumes gate is on level ground, in good condition with
properly adjusted hardware. Other external factors may affect
the performance of the gate operator. If DC Convenience Open
option is installed, maximum gate weight is 1300 pounds. Other
external factors may affect the performance of the gate
operator.)
1/2 HP continuous-duty motor.
115, 230*, 460* VAC (*230 and 460
volt units use a step-down power transformer to achieve 115
volt operating voltage.)
Operator is shipped with chain
brackets and 20-feet of #40 chain.
Class I, II, III and IV
applications.
Compliant with UL 325 and 991. ETL
listed.
Dimensions: 15"W x 24"H x 16.5"D
DoorKing DKS9150-084 1/2 HP
SLIDE OPERATOR 30' & 1000
DoorKing DKS9150-086 1/2 HP
SLIDE W/CONV OPEN
For pricing or to place an order
please call us toll-free now at (877)
275-1270.
|
